OMRON

STi

Safety light curtain

F3SG-R series

RA Advanced type

Safety light curtain
Mutual interference prevention (Scan Code) -- This function prevents mutual interference in up to two F3SG-RA systems.
Cascade connection -- max. 3 cascaded segments
Cascade connection -- max. 255 beams
Cascade connection -- max. 10m cable between segments (not including cascading cable (F39-JGR2WTS) and power cable)
Test functions -- Self-test (at power-on and during operation)
Test functions -- External test (light emission stop function by activating TEST input)
Safety functions -- Interlock
Safety functions -- External device monitoring (EDM)
Safety functions -- Pre-reset
Safety functions -- Fixed blanking / floating blanking
Safety functions -- Reduced resolution
Safety functions -- Muting/Override
Safety functions -- Scan code selection
Safety functions -- PNP/NPN selection
Safety functions -- Response time adjustment

for finger protection (detects 14mm opaque objects)
emitter + receiver pair

103 beams x 14mm beam gap

19.2-28.8Vdc (24Vdc nom.)

0.3m...10m / 1ft...32ft (LONG mode)
0.3m...3m / 1ft...10ft (SHORT mode)

Infrared LED (IR)
Infrared (IR)

870 nm

Yellow housing

Pre-wired with 30cm / 12" pigtail terminated with 5-pin M12 connector (emitt.)
Pre-wired with 30cm / 12" pigtail terminated with 8-pin M12 connector (receiv.)

Output short-circuit protection
Power supply reverse polarity protection

1 x digital input (24Vdc; NPN/PNP) (emitter TEST)
1 x digital input (24Vdc; NPN/PNP) (receiver MUTE A/B)
1 x digital input (24Vdc; NPN/PNP) (receiver RESET)

2 x digital outputs (NPN or PNP; 300mA) (receiver OSSD outputs)
1 x digital output (NPN or PNP; 100mA) (receiver aux. output)

(ON=>OFF) 13ms / 0.013 s
(OFF=>ON; synchronized) 65ms / 0.065 s
(OFF=>ON; not synchronized) 165ms / 0.165 s

14mm (for finger protection)

IP65
IP67

1040mm protective height

Aluminium alloy housing
PBT resin caps
Acrylic resin window
Stainless steel FE plate

-30...+55 °C

-30...+70 °C

80mA (emitter)
95mA (receiver)

safety precautions
quick installation manual
troubleshooting guide sticker
warning zone label
standard fixed brackets (2 sets)

F3SG-4RA1040-14
1641701-1

Commercialized

Safety item #1641701-1 (16417011)
F3SG4RA104014

4548583563124

IEC 61496-1 - ESPE protection type 4
IEC 61496-2 - Type 4 AOPD (Active Opto-electronic Protective Devices)
EN ISO 13849-1 (2015) - PLe/Category 4
EN 61508-1 / EN 61508-2 / EN 61508-3 / EN 61508-4 - SIL3
IEC 61508 - PFHD = 1.1x10E-8
IEC 61508 - proof test interval TM = every 20 years
IEC 61508 - SFF 99%
IEC 61508 - HFT 1
IEC 61508-2 - Type B
IEC 60664-1
IEC 60529
IEC 61496-1 - Vibration resistance - 10 to 55 Hz Multiple amplitude of 0.7mm 20 sweeps for all 3 axes
IEC 61496-1 - Shock resistance - 100m/s2; 1000 shocks for all 3 axes
JIS B 9704-1 - Type 4 ESPE
JIS B 9704-2 - Type 4 AOPD
UL 61496-1 - Type 4 ESPE
UL 61496-2 - Type 4 AOPD
UL 508
UL 1998
CAN/CSA C22.2 No.14
CAN/CSA C22.2 No.0.8
GB/T 4584 (Specification of active opto-electronic protective devices for presses)

SIL3
ESPE Type4
PL.e / Cat4

Increase both durability and productivity -- The new cutting oil resistant Robust type is added
Fast set-up and high resistance to environmental changes
Quick and easy installation -- Intuitive and smart designs for fast set-up
Simple beam adjustment -- Simply watch for the top and bottom indicators to illuminate when adjustment is completed. The optional laser pointer and lamp can be used to reduce the time required to set up the light curtain.
Mounting brackets -- Four types of mounting brackets provide vertical or vertical and horizontal adjustment even after mounting; making beam adjustment easier.
Optical synchronization -- No sync lines required. Optical synchronization eliminates the need of wiring for synchronization between the emitter and receiver. The resulting flexible wiring reduces disconnection risk and avoids noise sources.
Smartclick cable connection for fast set-up -- No torque-control required. The Smartclick connectors connect cables with just a 1/8th turn of the M12 waterproof connector.
Stable operation and predictive maintenance -- Visualization eliminates machine downtime. The lamp notifies low light intensity. The lamp notifies when the incident light level drops due to dirt; which prevents sudden stops.
Data logging for quick troubleshooting -- The error logs stored in the F3SG-RA can be downloaded to a PC that is connected with the F3SG-RA using the dedicated interface unit. The Configuration Tool SD Manager2 can be used to analyze errors to identify causes and solutions. The data on light intensity; power-ON time; and switching frequency can also be collected regularly for predictive maintenance.
Bluetooth allows to check status without stopping the line -- The SD Manager2 can be used to check the status of the safety light curtain wirelessly after pairing the safety light curtain with PC via Bluetooth; which reduces maintenance time.
Easy to deploy around the world -- PNP/NPN selection. The F3SG-RA is designed to be used in a variety of environments around the world; conforming to international standards.
Troubleshooting in eight languages -- You can find causes and solutions of errors that occur during operation on the troubleshooting webpage in eight languages. Operators across the world can check the error details in their local languages; which will help them minimize time to troubleshoot. Available in English; Chinese; Italian; Korean; French; German; Spanish; and Japanese
Easy adjustment -- Increase productivity by detecting workpieces correctly
Muting -- The F3SG-RA provides the advanced Muting function that disables beams which detect the presence of a workpiece or the position of a machine or robot. Workpieces can go in and out of a danger zone without stopping the machine.
Multiple-beam sensor technology for vibrating workpieces -- Smart muting actuator F3W-MA. The smart muting actuator extends the functions of the F3SG-R in applications where a workpiece is vibrating forward and backward This prevents unexpected machine downtime and significantly reduces adjustment time.
Automatic partial muting for workpieces with various heights -- Dynamic Muting. When workpieces with various heights are conveyed on the same line; the dynamic muting function automatically sets the appropriate beams; based on the height of the object.
Easy configuration and maintenance -- Easy to use Configuration Tool SD Manager2. Minimizing setting and detection errors. The Configuration Tool SD Manager2 visualizes the installation positions and settings by logging the muting sensor operating conditions of the F3SG-R. It helps ensure reliable; first-time-right configuration.
From configuration and adjustment to maintenance -- The SD Manager2 helps you to make and change settings.

United States

3 (as per IEC 60664-1)