OMRON

STi

Safety light curtain

F3SG-R series

RA Advanced type

Safety light curtain
Mutual interference prevention (Scan Code) -- This function prevents mutual interference in up to two F3SG-RA systems.
Cascade connection -- max. 3 cascaded segments
Cascade connection -- max. 255 beams
Cascade connection -- max. 10m cable between segments (not including cascading cable (F39-JGR2WTS) and power cable)
Test functions -- Self-test (at power-on and during operation)
Test functions -- External test (light emission stop function by activating TEST input)
Safety functions -- Interlock
Safety functions -- External device monitoring (EDM)
Safety functions -- Pre-reset
Safety functions -- Fixed blanking / floating blanking
Safety functions -- Reduced resolution
Safety functions -- Muting/Override
Safety functions -- Scan code selection
Safety functions -- PNP/NPN selection
Safety functions -- Response time adjustment

for hand protection (detects 25mm opaque objects)
emitter + receiver pair

96 beams x 25mm beam gap

19.2-28.8Vdc (24Vdc nom.)

0.3m...17m / 1ft...55ft (LONG mode)
0.3m...5m / 1ft...16ft (SHORT mode)

Infrared LED (IR)
Infrared (IR)

870 nm

Yellow housing

Pre-wired with 30cm / 12" pigtail terminated with 5-pin M12 connector (emitt.)
Pre-wired with 30cm / 12" pigtail terminated with 8-pin M12 connector (receiv.)

Output short-circuit protection
Power supply reverse polarity protection

1 x digital input (24Vdc; NPN/PNP) (emitter TEST)
1 x digital input (24Vdc; NPN/PNP) (LOCKOUT RESET INPUT)

2 x digital outputs (NPN or PNP; 300mA) (receiver OSSD outputs)
1 x digital output (NPN or PNP; 100mA) (receiver aux. output)

25mm (for hand protection)

IP65
IP67

1945mm protective height

Aluminium alloy housing
PBT resin caps
Acrylic resin window
Stainless steel FE plate

-30...+55 °C

-30...+70 °C

safety precautions
quick installation manual
troubleshooting guide sticker
warning zone label
standard fixed brackets (3 sets)

F3SG-4RA1945-25-01TS

Commercialized

F3SG4RA19452501TS

4548583864986

IEC 61496-1 - ESPE protection type 4
IEC 61496-2 - Type 4 AOPD (Active Opto-electronic Protective Devices)
EN ISO 13849-1 (2015) - PLe/Category 4
EN 61508-1 / EN 61508-2 / EN 61508-3 / EN 61508-4 - SIL3
IEC 61508 - PFHD = 1.1x10E-8
IEC 61508 - proof test interval TM = every 20 years
IEC 61508 - SFF 99%
IEC 61508 - HFT 1
IEC 61508-2 - Type B
IEC 60664-1
IEC 60529
IEC 61496-1 - Vibration resistance - 10 to 55 Hz Multiple amplitude of 0.7mm 20 sweeps for all 3 axes
IEC 61496-1 - Shock resistance - 100m/s2; 1000 shocks for all 3 axes
JIS B 9704-1 - Type 4 ESPE
JIS B 9704-2 - Type 4 AOPD
UL 61496-1 - Type 4 ESPE
UL 61496-2 - Type 4 AOPD
UL 508
UL 1998
CAN/CSA C22.2 No.14
CAN/CSA C22.2 No.0.8
GB/T 4584 (Specification of active opto-electronic protective devices for presses)

SIL3
ESPE Type4
PL.e / Cat4

Japan

3 (as per IEC 60664-1)