OMRON

STi

Safety light curtain

F3SJ series

Advanced type

Safety light curtain
Mutual interference prevention -- Interference light prevention algorithm
Mutual interference prevention -- detection distance change function
Series connection -- max. 4 sets (between F3SJ-A only; other models cannot be connected.)
Series connection -- max. 400 total number of beams
Series connection -- 15m max cable length for 2 sets
Test functions -- Self-test (at power-on and during operation)
Test functions -- External test (light emission stop function by activating TEST input)
Safety-related functions -- Start interlock / restart interlock (Must be set with a setting tool when the muting function is used)
Safety-related functions -- External device monitor
Safety-related functions -- Muting (Lamp burnout detection; override function included. F39-CN6 key cap for muting is required)
Safety-related functions -- Fixed blanking (must be set by a setting tool)
Safety-related functions -- Floating blanking (must be set by a setting tool)

for hand protection (detects 20mm opaque objects)
emitter + receiver pair

84 beams x 15mm beam gap

19.2-28.8Vdc (24Vdc nom.)

0.2m...9m

Infrared LED (IR)
Infrared (IR)

870 nm

Yellow housing

Pre-equipped with 8-pin M12 connector (emitt.)
Pre-equipped with 8-pin M12 connector (receiv.)

Output short-circuit protection
Power supply reverse polarity protection

1 x digital input (24Vdc; PNP) (emitter TEST)
1 x digital input (24Vdc; PNP) (INTERLOCK SELECT)
1 x digital input (24Vdc; PNP) (receiver MUTE)
1 x digital input (24Vdc; PNP) (receiver RESET)
1 x digital input (24Vdc; PNP) (EXTERNAL DEVICE MONITORING)

2 x digital outputs (PNP; 300mA) (receiver OSSD outputs)
1 x digital output (PNP; 300mA) (receiver aux.1 output)
1 x digital output (PNP; 50mA) (emitter aux.2 output; indicates 30000hours emitter lifespan is reached)
1 x digital output (24Vdc 3-7W incandescent lmp.) (receiver EXTERNAL INDICATOR 1 output / software adjustable function)
1 x digital output (10-300mA LED lmp.) (receiver EXTERNAL INDICATOR 2 output / software adjustable function)

(ON=>OFF; 1 set) 17.5-22.5ms / 0.017-0.0225 s
(OFF=>ON; 1 set) 70-90ms / 0.07-0.09 s

20mm (for hand protection)

IP65

1265mm protective height
W30mm x L30mm

Aluminium alloy / Die-cast Zinc housing
ABS resin caps
PMMA acrylic resin window
Oil-resistant PVC cable

-10...+55 °C

-30...+70 °C

106mA (emitter)
90mA (receiver)

instruction manual
standard mounting bracket (F39-LJ1 bracket for top/bottom mounting)
error mode label
quick installation manual (QIM)

F3SJ-A1265P20
40560-2035

Commercialized

Safety item #40560-2035 (405602035)
F3SJA1265P20

4547648479875

IEC 61496-1 / EN 61496-1 / UL 61496-1 - Type 4 ESPE (Electro-Sensitive Protective Equipment)
IEC 61496-2 / EN 61496-2 / UL 61496-2 - Type 4 AOPD (Active Opto-electronic Protective Devices)
IEC 61508-1 / -2 / -3 / EN 61508-1 / -2 /-3 - SIL3
ISO 13849-1 (2015) / EN ISO 13849-1 (2015) - PL e/Category 4
Vibration resistance - 10 to 55 Hz Multiple amplitude of 0.7mm 20 sweeps for all 3 axes
Shock resistance - 100m/s2; 1000 shocks for all 3 axes
UL 508
UL 1998
CAN/CSA C22.2 No.14
CAN/CSA C22.2 No.0.8

SIL3
ESPE Type4
PL.e / Cat4

Multi-functional for special applications such as finger protection with the ADVANCED type. The detection capability supports finger protection through use of 9mm resolution. The ADVANCED type is equipped with various functions such as blanking; muting and the programing of warning zones. All settings can be done via an easy to use software tool. This Tool simplifies installations that were previously complicated; again our way of reducing cost and increasing productivity.
Tool for setting parameters and checking the system status -- With the ADVANCED type (F3SJ-A) SD Manager all parameters can be set and the system status can be checked with a personal computer. Complex settings are now simple to configure
Detection capability supports finger-protection -- Even if the distance from the hazard is short we have prepared a lineup that includes safety light curtains with a detection capability of 14mm.
Versatile muting function possible -- Equipped with partial muting that disables only the beams where a workpiece passes through and position detection muting that disables the beams while detecting the position of a machine or robot.
The blanking function disables specific beams of the Safety Light Curtain -- If a part of the mechanical equipment is within the detection zone of the Safety Light Curtain the relevant beams can be disabled. This is possible not only with non-moving parts but also with moving parts.
Setting up a warning zone to prevent unnecessary stoppage -- Under normal use if an intrusion occurs in the safety zone the machine will stop immediately. However use of a warning zone will only notify the operator that an intrusion has occurred. This can be used to prevent carelessness resulting in machine stoppage on the part of the operator.
Dividing the zone between series-connected sensors -- A single sensor zone can also be divided

United States